Professional dismantling of tiles of any complexity
Tile dismantling — it is not just brute physical force, but a delicate and controlled process. Our goal is to remove the old coating in a way that preserves the integrity of the base as much as possible. We understand that every pothole in the screed or damaged sheet of drywall is your additional costs for leveling and materials in the future.
1. Careful attitude to the base
We use specialized blades and attachments with the correct angle of attack, which allows us to "blow up" the tiles without biting into the wall.
2. Maintaining communications
Before starting work, we scan the walls for hidden electrical wiring and water pipes.
3. Professional equipment
We work with industrial series tools (Bosch, Makita, Hilti) with active vibration absorption systems. This allows us to perform work with minimum noise level, which is critically important for Kyiv's apartment buildings and maintaining relationships with neighbors.
4. Process cleanliness
Each blow is accompanied by the work of an industrial vacuum cleaner. We localize the work area so that fine dust does not spread throughout the apartment.
We prepare the site so that your next master tiler can immediately begin priming and laying, without spending days repairing damaged partitions.
We work with all types of coatings and surfaces
There is no tile we cannot remove. We adapt the tool and the impact force to each type of cladding to guarantee speed without damaging the structure of the building.
Dismantling tiles in the bathroom
The most responsible zone. We work extremely carefully so as not to damage the pipework, meters and plumbing boxes. We pay special attention to preserving the waterproofing layer or its correct removal.
Dismantling tiles in the kitchen
We perform local tile removal in the kitchen area without damaging the furniture (if any) and adjacent surfaces. We make sure that small fragments do not get into the ventilation holes.
Dismantling of porcelain stoneware and large-format tiles
Modern porcelain stoneware is highly durable and difficult to remove. We use professional perforators with high impact energy, which allows us to remove even “difficult” tiles laid on elastic, highly adhesive mixtures.
Dismantling of tiles and old Soviet tiles
Old tiles laid on cement mortar often hold "tightly" or, conversely, come off in whole layers. We quickly clean the walls from the remains of cement "splatters", returning the walls to their geometry.
Dismantling ceramic tiles
We work with any format and material strength. We use technology that allows knock down the tile without destroying the foundation.
Dismantling of plasterboard
A delicate process with minimal stress on the structure. Ideal for partitions and decorative elements.
Dismantling concrete tiles (paving tiles)
High-complexity work that requires powerful professional tools. We do not just remove the coating, but complete mechanical cleaning of the concrete base from old adhesive mixtures and cement deposits.
How we work
We don't just knock down tiles - we prepare a springboard for your future renovation. Our approach is based on a preliminary analysis of the object, which allows you to avoid critical errors: damage to electrical wiring, water pipes or underfloor heating systems. Every move of the master is aimed at preserving the structural integrity of the walls and ceilings.
Step-by-step process of performing work:
Diagnostics and localization of communications: We use detectors to detect hidden wiring and utility networks. This is the zero stage that guarantees the safety of the work.
Assessment of adhesion type (glue and substrate): We determine the composition of the adhesive mixture (cement, epoxy or polymer). This allows you to choose the right tool and angle of impact so as not to tear out pieces of the wall along with the tiles.
Tension relief stitching: Before dismantling the main area, we cut the seams. This relieves the tension between adjacent tiles and allows the elements to be dismantled neatly, without uncontrolled chipping of the base.
Systematic phased dismantling: We move from top to bottom or from the extreme zones, strictly controlling the trajectory of the falling debris. We use impact nozzles with low vibration so as not to damage the plaster layer of neighboring rooms.
Deep cleaning and polishing: After removing the tiles, we completely remove the remains of old glue and cement scum. You get a clean surface without "teeth" and irregularities.
Final surface preparation: We carry out dust removal and surface assessment. You receive a base that is 100% ready for priming, leveling or direct installation of a new coating.
The cost of dismantling tiles in Kiev
We are for an honest and transparent price without "surprises" at the end of the work. The cost depends on the type of material, the method of its attachment (on glue or on mortar) and the condition of the base. The table below shows the basic rates, which include professional tools and a dust removal system.
For an accurate calculation of the object, we recommend sending a photo/video via messenger or inviting a craftsman to take measurements.
| Service | Price from UAH |
|---|---|
| Dismantling tiles (wall) | Price is negotiable |
| Dismantling tiles (floor) | Price is negotiable |
| Removing tiles from drywall | Price is negotiable |
| Cleaning from glue | Price is negotiable |
Why do people trust us with tile removal?
Dismantling without a dust curtain
We use powerful industrial lift trucks directly in the dismantling area.
Preservation of the foundation and communications
You avoid the risk of damaging hidden pipes, cables or underfloor heating.
Control every stroke
Thanks to a professional tool with low vibration, we prevent cracks in the walls and destruction of the plaster layer in neighboring rooms.
Readiness for the next stage
After our visit, the surface is completely ready for priming and new coating. We prepare the base so that your next master can start work without delay.
Expertise in difficult conditions
We successfully work on objects of any complexity: from compact bathrooms in Khrushchev apartments to large-scale commercial premises and kitchen studios. We know the specifics of each type of glue and base.
We work with any objects
We dismantle tiles in apartments, offices, and commercial premises.
Frequently asked questions
We have selected answers to the questions we are asked most often. If you can't find the information you need, just give us a call.
Do you travel outside of Kyiv?
Yes, we work throughout Kyiv and Kyiv region (Brovary, Irpin, Bucha, Vyshgorod, Boryspil, Gatne and other settlements). The cost of traveling outside the city limits depends on the distance and scope of work.
Do you take out the trash after dismantling?
By arrangement, we can organize the complete removal and disposal of construction waste to a landfill so that you receive a completely clean premises.
How long does it take to dismantle a standard bathroom?
Typically, tile removal in a standard bathroom (walls + floor) takes 4 to 7 hours. We try to complete all noisy work in one business day to minimize discomfort for you and your neighbors.
Do you work on weekends?
We understand the urgency of repairs, so we work on Saturdays or Sundays. However, in accordance with noise regulations, we will coordinate with you the time of noisy work so as not to disturb the peace of your neighbors.