Professional dismantling of electricity
When it comes to major repairs, redevelopment of premises or complete replacement of engineering communications, one of the most important and responsible stages is dismantling of electricity. This process is much more complicated than it might seem at first glance, and requires not only physical effort, but also deep technical knowledge, adherence to strict safety standards and the use of specialized tools. Incorrectly performed work can lead to electric shock, short circuits, fires and property damage. That is why such a task should be entrusted exclusively to qualified specialists. We provide electrical dismantling services, guaranteeing safety, efficiency and compliance with all building codes.
When is professional dismantling of electrical wiring necessary?
There are a number of typical situations where hiring professionals for dismantling is not just desirable, but mandatory. If you are looking for electrical dismantling services, your case is probably one of the following:
Major renovation of an apartment or house
This is the most common reason. When leveling walls, changing the layout, or completely updating the interior, old wiring almost always gets in the way and needs to be completely replaced.
Replacing old aluminum wiring with copper
Aluminum wiring, common in Soviet-era buildings, has a limited service life (20-25 years), is fragile, and cannot withstand the load of modern household appliances. Its dismantling and replacement is a key step towards improving home fire safety.
Redevelopment of premises
When demolishing walls, combining rooms, or creating new partitions, it is necessary to completely change the cable routing, which is impossible without first dismantling the old lines.
Consequences of flooding or fire
Electrical wiring exposed to water or high temperatures becomes dangerous. Its insulation loses its properties, which can lead to short circuits. In such cases, complete dismantling is the only alternative.
Electrical system modernization
If you plan to increase power, add new lines for powerful consumers (electric stove, boiler, air conditioner), you need to review the entire system, which often begins with the dismantling of old, unsuitable components.
The Dangers of Self-Dismantling: Why "Do It Yourself" Is a Bad Idea
The desire to save money can lead to the idea of performing dismantling of electricity on your own. However, the risks in this case far outweigh the potential benefits. Here are just a few of the dangers that a layperson may encounter:
- Risk of electric shock. Even when the main circuit breaker in the panel is turned off, residual voltage may remain in the system, or the wrong line may be accidentally disconnected. Electric shock can result in serious injury or death.
- Damage to hidden communications. Heating, water or gas pipes may run in the walls next to electrical cables. Careless actions can cause damage to them, which will lead to much more expensive repairs.
- Short circuit and fire. Improperly disconnecting wires, leaving bare ends under voltage, can instantly cause a short circuit, which, in turn, is one of the main causes of fires.
- Incomplete removal. An inexperienced person may leave parts of old wiring in the walls that will remain energized (so-called “phantom” lines), creating a hidden threat for the future.
- Legal responsibility. In the event of damage to common building networks or harm to neighbors, all responsibility will fall on the contractor.
Professionals providing electrical dismantling services, have not only experience, but also special voltage indicators, tools and personal protective equipment that minimize all risks.
Stages of professional dismantling
Our company adheres to a clear and proven algorithm of actions, which guarantees a high-quality and safe result. The dismantling process is as follows:
Consultation and inspection of the facility
Our specialist will visit the site to assess the scope of work, study the existing wiring diagram, and discuss the tasks with the client. It is determined whether full or partial dismantling is required.
Preparation of work plan and estimate
Based on the inspection, a detailed action plan and a transparent estimate are formed, indicating the cost of dismantling the electrical system and all related work.
Preparatory work and safety measures
Before starting work, the room is cleared of furniture as much as possible. The most important step is to completely de-energize the facility. Using voltage indicators and testers, we check for the absence of voltage on all lines that are to be dismantled. Warning signs are installed.
Phased removal of components
The work begins with the dismantling of the endpoints: sockets, switches, lighting fixtures. Then, following from the endpoints to the junction boxes, and from them to the panel, the cable lines are removed. The process is carried out carefully to minimize damage to the walls and ceiling.
Dismantling the switchboard
If the project requires it, the old panel and its components are dismantled. All incoming cables are marked.
Insulation and marking
Those lines that remain temporarily (for example, for temporary lighting) are reliably insulated.
Cleaning and disposal
After all work is completed, we clean the workplace from construction debris. Old wires and components are collected for further proper disposal.
By contacting us, you can be sure that each stage will be carried out in compliance with the highest quality and safety standards. We provide electrical dismantling services both for private clients in apartments and houses, and for commercial facilities. We understand how important it is to create a clean and safe space for further electrical installation work, and we guarantee exactly this result.